Dlink / D-link DSC cctv camera setup tips

1. Make sure your router has UPnP enabled/if it is supported by your router.
2. Your router has been upgraded with the latest firmware version available. Upload and install any new firmware versions and then restart your router.
3. Check that the front LED on your camera is lit solid green. The DCS-933L will automatically create a secure wireless connection to your router. While connecting, the green LED will flash and your camera will reboot.
4. Once the camera is powered on, then press and hold the WPS button for three seconds. The blue WPS status LED will start blinking.

You may also like...